ArmorGarageReviews 114

Pressure washed floor 3 times, etched with muriatic, then citric, then neutralized with TSP as directed. Dried 24 hrs. Primer went on great! Waited 8 hours, main color fish eyed 20 minites after application. Tried re-rolling it on one area and it fish eyed again. Nothing i could do at that point but wait overnight and then went forward with the clear topcoat. The topcoat did not fish eye and appears to have sealed the top. Doesn't look the best, but seems solid and stout. Kinda bummed, but it is what it is.

Nowhere in anything that talks about their product does it state that it is not UV safe. Sent photos asking about their guarantees to have them tell me that it's not guaranteed because of sun damage. This is after 6 months after application.

I spent alot of money to paint my 2 car garage floor. I followed instructions exactly how they wanted. Topcoat started to peel a year later now my garage looks so bad. I should have left it bare concrete. Good luck if you buy it, don't say you wasn't warned. So frustrating I spent all that money for it to peel up. I will be more than happy to provide more info and Pic if needed.

Great epoxy but the sealer sucks when it's wet. I can't tell you how many times we've fallen on it in the last 8 months. From my wife, to my 3 year old to myself. We spent $1500 for the kit and non slip coating, first time it got wet we were ice skating so they told me I needed a different non-slip sealer, another $200 + later put that down and it's no better than the first sealer, contacted Armor Garage and now they are telling me if i buy a third type of non-slip coating for another $560 it "should" be non-slip. Sorry guys but i thought you would have stepped up to the plate to make it right since the first 2 times i did what you recommended and it didn't fix the problem. Good for you for getting my money but seeing how I've worked in auto shops for the last 20 plus years and continue to do so I'll be sure to pass the word along on just how happy i am!

This is the best i have for proof or purchase:

Joe, looking back at your original order it seems you did approx 850 s/f. For that square footage you'll need
2 gallons of Top Coat and 2 Qt's of the Aluminum Oxide. Retail is $235.00 per gal (top coat) and $45.00 each
Per qt of (non slip) $560.00. That said, I will discount it for you to $460.00 delivered.

Sales
ArmorGarage LLC
*******979

We purchased their product for our 1152 square feet family shop a little over a year ago. My husband and my 3 sons and their friends use the shop to service personal vehicles, our tractor, and to work on project cars. We've had several car engines removed and replaced using a steel wheel engine hoist, we've had hot steel splatter from an acetylene torch, and we've had several different chemicals spilled on it and we've had no failures in the product. We followed the prep instructions carefully because there were several oil spills to remove prior to application. We are building a new house and we will definitely put this product on our garage floor.

I bought my brand new car there and every time, EVERY TIME, doesn't matter if it's a tire rotation and oil change or a car inspection or getting snow tires on or anything else, I am here for HOURS. It shouldn't be like this. Will never buy another car from them again. They think I have hours to sit around while they take their time doing something so simple as swapping out tires. I make an appointment for everything and yet 4 hours later I am still here. They give zero care that you sit there for hours. Will buy from another place next time I need a car. Absolutely ridiculous!